Home | Product Information | Contact Information | Ordering Information | FAQ | MSDS

Manufactured by:

PLUTUS Environmental
Technologies, Inc.


Approved Vendor

Authorized Chemical
Supplier to Parts
Manufactures for:















Approved Vendor

A New Innovation

Commercial and Industrial Facilities finally have a safe, non-hazardous, non-flammable parts wash. PLUTUS Environmental Technologies, Inc. announces XTREMEŠ Parts Wash.

Your Alternative to Hazardous Chemicals

This innovative new product carries a 0-0-0 Hazmat Rating, and is so effective, yet safe, that not only is XTREMEŠ Parts Wash used in heavy industry and in the oil fields to remove industrial greases and heavy crude oil residues, but it has also been approved for disposal in municipal wastewater systems.

Characteristics

This unique chemical formulation is part of the PLUTUS Environmental Series of specialized cleaning compounds and remediation agents. XTREMEŠ Parts Wash differs from other parts washes in that it is a hydrocarbon modifier rather than a solvent. Solvents collect the problem that you want removed and then concentrates that problem in the reservoir of the washer. You don't want to keep it.....you want to flush it!

XTREMEŠ Parts Wash safely removes grease, oil, dirt, mold & mildew, scale, and light rust. XTREMEŠ Parts Wash contains two (2) microbicides to prevent bacterial contamination of the reservoir, and contains a corrosion inhibitor as well as a drying agent.

Safety & Handling Measures

XTREMEŠ Parts Wash leaves no oily film or residue, and does not harm normal skin types, however some skin types may dry or redden with continued exposure. XTREMEŠ Parts Wash does not require special storage or handling. Safety glasses should always be worn when using parts washers to prevent foreign matter from being splashed into the eyes. If in doubt about procedure always consult your Safety Officer or OSHA Regulations before proceeding.

Your Parts Washers Will Love You For It

Maintenance of parts washers is simple. When a layer accumulates on the surface of the reservoir, simply skim it off and toss it in the waste oil tank. XTREMEŠ Parts Wash will dissolve the layer if left in the washer, but the life of the product will be lengthened if the layer is removed. This removal saves you money and retains the strength of the product. Additional product generally is added to replace loss only.

Safe and Easy Disposal

If unusually heavy use requires the product to be replaced, then the spent product may be safely poured down the sewer drain.

Utility District tests show that when XTREMEŠ Parts Wash is added to the sewer stream, biological activity is increased. XTREMEŠ Parts Wash is broken down into nutrients which feed naturally occurring microorganisms in the sewer. These microorganisms feed on the various remaining nutrient compounds which are then returned to the stream as water, carbon dioxide, etc.

The results of using XTREMEŠ Parts Wash are clean parts, clean sewers, and a cleaner environment. Local Regulations should always be consulted before discharging XTREMEŠ Parts Wash into the sewer.

Product Warranty Information

PLUTUS warrants for a period of thirty (30) days after delivery that all products are warranted to be free from defects in material and workmanship if applied and used in strict accordance with Manufacturer's usage instructions. Liability is limited to the sale price of any products proved to be defective or, at the Manufacturer's option, to the replacement of such products upon their return to them. No products are to be returned to the Manufacturer, until there is an inspection by the Manufacturer or Manufacturer's duly authorized and appointed representative, and upon written approval by the Manufacturer.

All complaints should be directed first to the person/entity/representative who sold the product. If satisfaction is not obtained or the name of the person/entity/representative is not known, write the Manufacturer that appears on the label, directed to the attention of Customer Service Manager.

THIS LIMITED WARRANTY IS EXPRESSLY IN LIEU OF ANY AND ALL REPRESENTATIONS AND WARRANTIES EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

The remedy set forth in this Limited Warranty shall be the exclusive remedy to any person or entity. No person or entity has the authority to bind the Manufacturer to any representation or warranty other than this Limited Warranty. The Manufacturer shall not be liable for any incidental and/or consequential damage(s) resulting from the use of our products or caused by any defect, failure, or malfunction of our products.

CopyrightŠ 1999-2006. All rights reserved. This website and its contents are copyrighted internationally by PLUTUS Environmental Technologies Inc, Knoxville, Tennessee, USA. Send Comments to Webmaster. Logos & Trademarks of Ford Motor Company, its subsidiary and associate companies, and the Visteon Corporation are registered trademarks of the respective companies. Use of these logos does not imply an endorsement of PLUTUS Products for that company. These logos are used to represent past, existing or future business relationships with clients, which are owned or associated with Ford Motor Company, that represent our business interests through our vendor status with Ford Motor Company.